Rockford Fosgate P1000X5 Punch Series 125W RMS x 4 at 2-Ohms + 5th Channel 300W RMS x 1 at 2-Ohms, Class BD Full Range Car Amplifier
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Punch Series 5-Channel Car Amplifier
- • (4) 1-1/2" Self-tapping screws
- • 2.5mm Allen wrench
- • Quick setup instructions
- • Certificate of Performance
- • Owner's Manual
Why Choose Rockford Fosgate P1000X5 5-Channel Amplifier?
All-In-One Powerhouse for a Full System Upgrade
The Rockford Fosgate P1000X5 Class BD Full Range Car Amplifier is built for car audio enthusiasts who want one amp that can run the entire system without compromise. Its versatile 5-channel hybrid design combines Class AB stereo channels with a dedicated Class BD mono subwoofer section, letting you run it as a full 5-channel setup, a simplified 4-channel system, or even a 3-channel configuration depending on your build.
Balanced Power Across Every Channel, No Weak Links
This amplifier delivers serious output where it matters. The full-range channels give you 75W x 4 at 4 ohms, 125W x 4 at 2 ohms, or 250W x 2 bridged for more aggressive setups. For bass, the mono section pushes 150W x 1 at 4 ohms, 300W x 1 at 2 ohms, and up to 500W x 1 at 1 ohm, giving you tight, controlled low end that matches the strength of your mids and highs. Everything is CEA-2006 certified, so the power ratings are real-world tested at 14.4V with low distortion, not inflated marketing numbers.
Cool, Clean, and Built for Long Term Performance
Inside, a precision cast aluminum heatsink improves cooling efficiency by about 30 percent compared to traditional designs, keeping temperatures stable even during long drives with high volume. Dynamic thermal distribution spreads heat evenly across the chassis, while MEHSA³ MOSFET cooling technology helps maintain low operating temperatures under heavy load. DSM precision surface mount engineering and balanced differential inputs work together to reduce noise, improve clarity, and keep your audio signal clean from start to finish.
Frequently Asked Questions (FAQ)
- • Why does the amplifier go into protect mode?
A shorted speaker wire or speaker impedance that's too low can trigger protection. Check each speaker connection carefully and use a volt/ohm meter to test for shorts.
- • Why won't it turn on even though the power and remote wires have voltage?
A user reported the amplifier having power and a hot remote wire but no power LED after an accident. Check the fuses, ground connection, and amplifier itself for damage.
- • Why does one front channel keep cutting in and out?
One owner reported a front-right channel repeatedly becoming quiet and then loud. Swap the speaker and RCA connections to isolate the problem before servicing the amplifier.
- • Why does it shut down when I'm playing music loudly?
High output and low-impedance loads can increase thermal and electrical stress. Make sure the amplifier has sufficient airflow and that every connected speaker meets the required impedance.
- • Why does it get hot during extended use?
Heavy loads and continuous high output naturally increase temperature. Provide adequate ventilation and avoid mounting the unit where heat cannot escape effectively.
- • Why am I hearing engine noise or unwanted noise from the speakers?
Improperly routed RCA cables or poor grounding can introduce noise. Keep signal cables away from power wiring and make sure the grounding point is clean metal.
- • Why does the amplifier make a popping sound when it turns on?
A turn-on pop can be related to the remote signal or source unit. Test the amplifier without the input signal and consider a delayed remote turn-on if necessary.
- • Why is there no sound even though the amplifier has power?
Check the RCA connections, input settings, speaker wiring, and source signal. Testing a known-good RCA source directly into the amplifier can help isolate the problem.
- • Why does the amplifier stop working after getting very hot?
Thermal protection can temporarily shut the amplifier down when temperatures become excessive. Allow it to cool, improve airflow, and check the speaker load before continued use.
- • Why does the sound become distorted when I turn up the gain?
Too much gain can overdrive the input signal and cause clipping. Use the C.L.E.A.N. setup procedure and lower the gain if the clip indicators show excessive signal.
- Maximum Power : 500 Watts
- Number of Channels : 5
- Frequency Response : 20-20000 Hz
- Amplifier Class : AB/D
- Fuse Rating : 150 A
Features:
- Versatile 5-Channel Hybrid Amplification Architecture: Combines dual Class-AB full-range stereo channels with a dedicated Class-BD mono subwoofer section, delivering flexible system configuration as a 5-channel, 4-channel, or 3-channel amplifier with independent bridgeable outputs for tailored system design.
- High-Efficiency Multi-Load Power Delivery System: Provides 75W x 4 at 4Ω, 125W x 4 at 2Ω, or 250W x 2 bridged for full-range channels, plus 150W x 1 at 4Ω, 300W x 1 at 2Ω, or 500W x 1 at 1Ω for the subwoofer section, ensuring balanced full-system output performance.
- Certified CEA-2006 Performance Measurement Standard: Engineered under CEA-2006 testing criteria for RMS output and signal-to-noise accuracy at 14.4V with ≤1% THD+N, ensuring consistent, comparable, and reliable amplifier specifications across all channels.
- Advanced Cast Aluminum Thermal Management System: Features a precision-cast aluminum heatsink that improves heat dissipation efficiency by approximately 30% over extruded designs, maintaining stable performance under continuous multi-channel operation.
- Dynamic Thermal Distribution Architecture: Utilizes DTM technology to evenly distribute thermal load across the heatsink, reducing localized heat buildup and improving long-term operational reliability.
- MEHSA³ High-Efficiency MOSFET Cooling Platform: Incorporates third-generation Maximum Efficiency Heat Sink Application technology to enhance MOSFET thermal transfer, reducing operating temperatures while supporting sustained high-power output.
- Trans-ANA High-Fidelity Signal Processing Design: Uses transconductance active nodal architecture to maintain signal integrity at low voltage stages, delivering cleaner audio reproduction with reduced distortion and improved sonic clarity.
- Intelligent NOMAD Protection System: Continuously monitors temperature, voltage, current, and impedance through real-time analog decision processing, protecting the amplifier without unnecessary audio limiting during normal operation.
- DSM Precision Surface-Mount Circuit Engineering: Built using automated high-speed robotics with 1% tolerance components and optimized PCB layout to reduce interference, improve efficiency, and lower operating temperature across all channels.
- Integrated CLEAN Gain Calibration Interface: Provides input and output clip LED indicators for precise system tuning, enabling accurate gain matching without external tools and preventing audio signal clipping.
- Balanced Differential Input Noise Rejection System: Eliminates induced signal interference by canceling common-mode noise, ensuring only clean audio signals are processed for improved clarity and detail.
- Comprehensive Multi-Zone Signal and Control Interface: Includes independent crossovers and input level controls for front, rear, and subwoofer sections, adjustable 12 dB/octave filters (50–250Hz), Punch EQ per channel group, infrasonic filtering for sub control, and optional PLC2 remote bass adjustment support.
Specifications:
- RMS Power Output (Watts x Channels): 75 x 4 , 300 x 1
- Peak Power Output (Watts x Channels): N/A
- Power at 2 Ohms (Watts x Channels): 125 x 4
- Bridged Power (Watts x Channels): 250 x 2
- Minimum Impedance Bridged: 4
- Minimum Impedance Unbridged: 2
- Minimum Impedance: 2
- Best Frequency Response: 20-20k Hz
- THD at Rated RMS Power: 1%
- Signal to Noise Ratio: 85 dB
- Input Voltage: 14.4v
- Amplifier Class: AB/D
- Low-Pass Crossover Frequency: 50-250 Hz
- Low-Pass Slope (dB/octave): 12 dB/octave
- High-Pass Crossover Frequency: 50-250 Hz
- High-Pass Slope (dB/octave): 12 dB/octave
- Bass Boost: 0-18 dB
- Bass Boost Frequency: 45 Hz
- Fan Cooled: No
- Fuse Rating: 150
- Speaker Level Inputs: Yes
- Preamp Outputs: No
- Width (inches): 15-1/8
- Height (inches): 2-7/16
- Depth (inches): 8-13/16
- Parts Warranty: 1 Year
- Labor Warranty: 1 Year
- UPC: 780687342180
- Weight: 16
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
Just recently installed one a month ago on my Accord and I’m really liking what I’m hearing. Great product from RF! Clean and powerful sound! Totally would recommend this for those looking for a 5ch amp!
